Florida Contractor License Lookup: What Each Result Means

A contractor reviews blueprint papers on a Florida job site to verify details for a florida contractor license lookup.

A Florida contractor license lookup on the DBPR’s license search tells you three things: the license type from its prefix (C for certified statewide, R for registered locally), the status, and any final disciplinary action. Only a status reading Current, Active lets someone contract. Inactive and delinquent licenses count as unlicensed for contracting.

Listen to this article, about 22 minutes. A synthetic voice reads the article and announces each section title as it begins; tables are read row by row and the questions at the end are left out.

Recorded 20 November 2026 from the article as published that day. Press a chapter to jump there; the highlighted line is what is playing. A play button sits beside every section heading, and once you scroll past this player a bar at the bottom of the screen keeps the controls in reach. Tap or click any sentence to hear the reading start from there.

On this page: every Construction Industry prefix from the DBPR code table, every lookup status set against the statute that decides whether the holder may contract, why a lapsed license still shows the word Active, and where the ranking guides and DBPR’s own glossary drift from the rule text.

Think you already know this? Five questions, one minute.

Every answer is on this page. Answer from what you know now; the page fills in the rest.

  1. 1. Where does section 489.119(5)(b) say a contractor’s license number must appear?

  2. 2. In the DBPR code table, which prefix is the Certified Roofing Contractor?

  3. 3. How does section 489.127(1) treat someone contracting on an inactive license?

  4. 4. Under section 489.116(5), when does a delinquent license become void?

  5. 5. Under section 489.141(2)(d), what happens to a recovery fund claim when the contractor did not hold a valid and current license?

The lookup itself takes a minute. Reading it takes longer, because the record speaks in two status words, a rank and a three letter code, and the most common trap on the page is a delinquent license that still shows the word Active. This page reads each field against the statute that gives it meaning. Everything below was read on 29 October 2026 unless another date is given.

How do you run a Florida contractor license lookup?

The search lives at the DBPR’s license search page. Choose search by name or by license number, pick Construction Industry as the board, and run it. A license number is the faster route because names repeat and businesses trade under other names. Copy the number from the contract or the advert, not from a photo of a card someone texted you.

That number should be easy to find. Section 489.119(5)(b) says “The registration or certification number of each contractor shall appear in each offer of services”, in any medium. A truck, a flyer or a website with no number on it is already telling you something.

A laptop and code book on a desk used to perform a florida contractor license lookup.
An online search quickly reveals the active status of any local tradesperson.

Open the result and the detail page shows the fields that matter: License Type, Rank, License Number, Status, Licensure Date, Expires, and links to View Related License Information and View License Complaint. The related link shows which businesses a contractor qualifies, which is how you match the person holding the license to the company on your contract.

Two groups will not show up under Construction Industry. Electrical contractors are licensed under Part II of Chapter 489 by a separate board, so search that board instead. The certified EC, registered ER and specialty codes that come back there are explained in how Florida splits the electrician license between the state and the counties. And trades that only a county licenses are searched on the county’s own site, as the Pinellas County licensing rules show with their own contractor search.

What do CGC, CBC, CRC and the other prefixes mean?

The prefix is the license category, and the first letter is the reach. DBPR’s code table, read from the search index on 29 October 2026 because the page refuses automated readers, says certified contractors carry an occupation code beginning with “C” and registered contractors one beginning with “R”. Certified means statewide. Registered means only the local jurisdictions where the holder met local competency rules. In Melbourne, for example, the city asks a registered contractor for a Brevard County competency card that a CGC holder never needs, as checking a certified general contractor in Melbourne shows.

PrefixDBPR codeLicenseWhere it works
CAC0601Certified Air Conditioning ContractorStatewide
CBC0602Certified Building ContractorStatewide
CCC0603Certified Roofing ContractorStatewide
CFC0604Certified Plumbing ContractorStatewide
CGC0605Certified General ContractorStatewide
CMC0606Certified Mechanical ContractorStatewide
CPC0607Certified Pool/Spa ContractorStatewide
CRC0608Certified Residential ContractorStatewide
RB0615Registered Building ContractorListed local areas only
RC0616Registered Roofing ContractorListed local areas only
RF0617Registered Plumbing ContractorListed local areas only
RG0618Registered General ContractorListed local areas only
RM0620Registered Mechanical ContractorListed local areas only
RR0623Registered Residential ContractorListed local areas only

Two prefixes catch people out. CCC is roofing, not some grander general license, and CPC is pools, not plumbing; plumbing is CFC. What a CCC holder may do on a roof, and the one shingle job a general contractor may do without one, is quoted in the roofing contractor license rules, statute by statute. The prefix also sets the size of job. A CRC holder is limited to one, two or three family homes of two habitable stories, as the residential contractor license scope sets out, so a CRC number on a contract for a four story building is a mismatch worth asking about. The guide to which Florida contractor license covers which work lines up the rest. A CFC scope reaches well past the kitchen sink, into medical gas and fire sprinkler piping, as the statute’s plumbing contractor definition, quoted in full shows.

Which license statuses allow someone to contract?

The status column carries two words, and DBPR’s Term Glossary calls them the primary and the secondary status. The primary says whether the paperwork is up to date. The secondary says whether the holder may work. The statute then decides what each combination means for contracting.

What the lookup showsDBPR glossary wordingWhat the statute saysMay contract?
Current, ActiveActive: “allowed to operate under the associated license”455.271(1): practice “only if the licensee has an active status license”Yes
Current, InactiveInactive: “not allowed to work under this license”489.127(1): inactive “is not duly certified or registered and is considered unlicensed”No
Delinquent, Active or Delinquent, Inactive“has not completed a timely renewal”489.116(1): may not contract without “an active status certificate or registration”No
Suspended“work privileges have been suspended for a specified period”489.127(1): operating on a suspended license is “considered unlicensed”No
Probationplaced on probation “as part of a disciplinary action”Still licensed, on terms set in the final orderYes, read the order
Null & Void“would have to reapply for licensure”489.116(5): renders the license “void”No
Revoked“no longer meets the department’s requirements”489.127(1)(e): no one may use a revoked certificateNo

The line that settles most arguments is the last sentence of section 489.127(1): “a person or business organization operating on an inactive or suspended certificate or registration is not duly certified or registered and is considered unlicensed.” Inactive is not a softer kind of licensed. For the purposes of contracting it is unlicensed.

Two tradespeople discuss paperwork at a table to ensure compliance with a florida contractor license lookup.
Only active and current licenses authorize a contractor to legally perform work.

Why does a delinquent license still say Active?

Because the second word is a memory, not a permission. DBPR’s own help answer on what Delinquent, Inactive means, read from the search index, says the license was not renewed by its expiration date and that the status before it expired was inactive. Delinquent, Active is the same thing for a license that was active when it lapsed. It is not active now. Section 489.116(1) says a holder “may not engage in contracting unless the certificateholder or registrant has an active status certificate or registration”. Lapsed is lapsed.

This matters right now. Certified licenses expire on 31 August of even numbered years and registered licenses on 31 August of odd numbered years, as the renewal and continuing education rules explain. The certified cycle ended on 31 August 2026, so any certified contractor who missed it has shown Delinquent since September, while the record still says Active in the second slot. One public record we opened for its field labels on 29 October 2026, a CGC license, showed exactly that: “Delinquent,Active”.

How long can it stay that way? Section 489.116(5) gives a delinquent holder the current licensure cycle to renew as active or inactive. Fail, and that “renders the certificate or registration void”, after which the holder starts again as a new applicant. For a certified license that lapsed on 31 August 2026, the cliff is 31 August 2028. What each stage costs, and the narrow hardship reinstatement in section 455.271(6)(b), are set out on the renewal dates, fees and late rules page. DBPR’s glossary describes Null & Void as a licensee who “has failed to renew several times”, which makes it sound more forgiving than the statute is. Two missed deadlines is enough.

Does a clean lookup mean the contractor is safe to hire?

No. A clean record means no final action has been published, which is a narrower thing. Section 455.225(10) keeps “The complaint and all information obtained pursuant to the investigation” confidential “until 10 days after probable cause has been found”, or until the contractor waives it. A complaint filed last month is invisible. DBPR’s glossary describes the View License Complaint link as a way to “View final agency actions”, which is what it shows: outcomes, not open files.

Reporting by The Florida Trib on 25 August 2026 put numbers on the gap. The Attorney General’s office had received 92 complaints about one home repair company and 209 about a roofing company it had sued, while the DBPR record for the first showed one closed complaint on one of its three licenses. The same report says that in 2025 the department “revoked just one company’s license for deceptive practices.” A Current, Active status is a floor, not a reference.

The other limit is that a license can be real and still not be the person doing your job. Section 489.127(4)(b) says a contractor “may not knowingly allow his or her certification number or registration number to be used” by someone unlicensed. The lookup cannot see that. Matching the name on the license to the company on the contract, through the related license link, is the nearest check the record allows.

Reading a Florida license lookup, field by field

Tick each field as you check it on the DBPR record. It records what you read, not whether a contractor is right for the job.

Built from sections 489.116, 489.119 and 489.127 of the Florida Statutes, read 29 October 2026. It never rules on a specific contractor.

Does the lookup show insurance or workers’ compensation?

No. The record shows a status, not a policy. Rule 61G4-15.003, read on 20 November 2026, asks the holder at first issue and at every renewal for “a signed affidavit attesting to the fact that the applicant has obtained and will maintain public liability and property damage insurance”. The certificate itself reaches the board only in a random audit: the rule says the applicant “will submit a Certificate of Insurance only when requested by this Board”. So the state’s file holds a promise, and the lookup does not show even that.

The same rule sets the minimum cover, and the prefix on the lookup tells you which row applies. The amounts below are the rule’s own table, unchanged since its last amendment on 15 November 2007.

License on the lookupPublic liabilityProperty damageSource
General contractor (CGC, RG)$300,000$50,00061G4-15.003(2)(h)
Building contractor (CBC, RB)$300,000$50,00061G4-15.003(2)(h)
Residential contractor (CRC, RR)$100,000$25,00061G4-15.003(2)(h)
Roofing, air conditioning, mechanical, sheet metal$100,000$25,00061G4-15.003(2)(h)
Plumbing, pool, underground utility, solar$100,000$25,00061G4-15.003(2)(h)
Specialty contractors, unless specified otherwise$100,000$25,00061G4-15.003(2)(h)

Those are floors, not a measure of whether the cover suits your job. The rule also describes what a real certificate carries: a policy number, the effective and expiration dates, and a named insured that “must reflect the exact name of the business organization qualified by the applicant”. That gives you a three way match to make. The insured name on the certificate, the business the related license link shows, and the company on your contract should be the same business. The insurance and financial requirements behind every state license explain where the affidavit sits in the application.

Workers’ compensation works the same way, from a different statute. Section 489.114 makes “evidence of workers’ compensation coverage pursuant to chapter 440” a condition of issue and renewal. When a policy is cancelled, the statute starts a process rather than flipping the status: the Division of Workers’ Compensation verifies the lapse and reports the license number, the department notifies the contractor and fines them $500, and failure to keep cover is grounds for the board to “revoke, suspend, or deny” the license. Nothing in the section changes the status on the day a policy lapses, so a contractor whose policy was cancelled can still read Current, Active while that process runs.

Many small contractors carry an exemption instead of a policy. Section 440.05 says an exemption certificate is “valid for 2 years after the effective date stated thereon”, with both dates printed on its face, and it names one corporation; a new one is needed for each new corporation. It covers only the officer: the officer must certify that the corporation’s employees “are covered by workers’ compensation insurance”, so a crew still means a policy. And subsection (4) makes every exemption certificate say that it “is NOT a license issued by the Department of Business and Professional Regulation”. An exemption waved across the kitchen table proves an officer opted out of workers’ comp. It proves nothing about a license, which is what the lookup is for.

Counties sometimes see more than the state does. Volusia County’s licensing system can show a state licensed contractor as Not Current when liability or workers’ compensation cover has expired, as the Volusia County contractor license page sets out. Everywhere else, the practical answer is to ask for the certificates directly and read the names and dates yourself.

What happens if the contractor turns out to be unlicensed?

The law leans hard on the contractor, not on you, but you lose a safety net. Under section 489.128(1), contracts “by an unlicensed contractor shall be unenforceable in law or in equity by the unlicensed contractor.” The date that counts is the contract’s effective date, or the date the last party signed it, or failing both, the first day the contractor supplied labor or materials. A license that lapses after signing does not make the earlier contract unlicensed under that section.

The cost to the homeowner is the recovery fund. Section 489.141(2)(d) excludes a claim “based upon a construction contract in which the contractor did not hold a valid and current license”. So the fund that exists for licensed contractors who walk off with a deposit is closed to anyone who hired an unlicensed one. That is the plain money reason to run the lookup before the deposit, not after.

For the contractor, unlicensed contracting is a first degree misdemeanor under section 489.127(2)(a), and a third degree felony on a repeat or during a declared state of emergency. The full picture of unlicensed contracting penalties in Florida covers the stop work orders and fines.

What do people who checked a contractor report?

We read two Reddit threads from the last five weeks and one news investigation; the pattern was the same in all three. The lookup catches the obvious problems and misses the ones that cost people money.

  • In an r/florida thread from September 2026, a homeowner reported hiring a licensed and insured company whose listed general contractor lived far from the job and, they said, never came to site. One reply described a contractor who had lost his licenses years earlier and kept working on someone else’s number. Another said filing a complaint achieved little, and a fourth pointed to the recovery fund.
  • In an r/PropertyManagement thread from October 2026, not Florida specific, managers said paperwork proves nothing and the state board site is the only check worth trusting. One reported a roofer’s license lapsing mid job, found only when the city inspector asked.
  • The Florida Trib’s August 2026 report documented companies with hundreds of Attorney General complaints whose DBPR records showed almost nothing.

Where these accounts agree with the rule text: a license lapsing mid job is exactly the delinquent status above, and license lending is exactly what section 489.127(4) forbids. Where they go further than the rules: the complaint system is slow by design, because of the confidentiality in section 455.225(10). The statute’s own timetable, from the written complaint to the 30 day probable cause vote and the recovery fund claim caps, is laid out stage by stage on the licensing board page. These are what people report, not findings, and the thread with the strongest account is also one side of an unresolved dispute.

Where do the lookup guides disagree with the rule text?

The ranking guides get the basics right and the expensive details wrong or missing.

ClaimWho says itWhat the rule text says
“Delinquent: A delinquent license is not a valid license”, with no mention that the record still shows ActiveLegalClarity, 1 April 2026489.116(1) agrees on validity; the lookup’s second word still reads Active
Inactive means the contractor “has chosen to place the license in an inactive state”LegalClarity489.127(1): an inactive holder “is considered unlicensed” for contracting
CRC “is limited to one-, two-, or three-family homes”Florida GC license guide, checked 12 October 2026489.105(3)(c) also caps it at two habitable stories over one uninhabitable story
Null & Void after the licensee “has failed to renew several times”DBPR glossary489.116(5): void at the end of the first cycle spent delinquent

Credit where due: both guides say that anything other than Current, Active is a reason to stop, and LegalClarity notes that complaints stay confidential until probable cause. Neither says what the recovery fund exclusion costs the person who skips the check.

Frequently asked questions

Is the DBPR license search free to use?

Yes. The DBPR license search at myfloridalicense.com needs no account or fee, and the detail page for each license shows its type, rank, status, licensure date and expiry.

What does Rank mean on a Florida license record?

DBPR’s glossary says rank is a term used “to segregate the requirements for licensure between groups that are somewhat similar in nature”.

Does a business tax receipt count as a contractor license?

No. Section 489.127(1) says “A business tax receipt issued under the authority of chapter 205 is not a license for purposes of this part.”

How long does a business have to replace its qualifying agent?

Section 489.119(3)(a) gives a business whose only qualifying agent leaves 60 days, and it may not engage in contracting until a qualifying agent is employed.

Can a void Florida contractor license be reinstated?

Section 455.271(6)(b) lets the department reinstate a void license at its discretion where the person failed to renew because of illness or economic hardship. Otherwise the holder reapplies as a new applicant.

Does a registered contractor’s license work in every county?

No. A registered license, with a prefix starting R, covers only the local jurisdictions where the holder met local competency rules. Statewide work needs a certified license, with a prefix starting C.

Finished the page? The same five questions from the top, to see what stuck.


Rules and fees change without notice. This page was checked against the sources linked above on the date shown. If you find something different, tell us in the comments.

Questions and corrections

Platform rules change without notice. If you hit something different when you applied, say so here and we will verify it and update the page.

Leave a Reply

Your email address will not be published. Required fields are marked *