Florida contractor continuing education is 14 hours per two year renewal cycle under section 489.115(4) and rule 61G4-18.001: one hour each of an advanced module, workplace safety, business practices, workers’ compensation and laws and rules, plus wind mitigation, pool electrical or cladding hours for the categories named. Certified licenses expire 31 August of even years, registered of odd years.
Listen to this article, about 22 minutes. A synthetic voice reads the article and announces each section title as it begins; tables are read row by row and the questions at the end are left out.
Recorded 17 November 2026 from the article as published that day. Press a chapter to jump there; the highlighted line is what is playing. A play button sits beside every section heading, and once you scroll past this player a bar at the bottom of the screen keeps the controls in reach. Tap or click any sentence to hear the reading start from there.
On this page: the eight continuing education topics of rule 61G4-18.001 in one cited table with the categories each applies to, the 2024 and 2026 renewal fees side by side from the DBPR’s own inserts, the provider reporting clock from section 455.2178, five dated 2026 accounts of renewing, and four claims from the ranking pages checked against the text.
Think you already know this? Five questions, one minute.
Every answer is on this page. Answer from what you know now; the page fills in the rest.
-
1. Under section 489.115(4)(b), how long is one of the 14 classroom hours?
The statute asks for at least 14 classroom hours of at least 50 minutes each in every biennium. Florida Statutes 489.115 Read the section
-
2. Which license categories owe the one hour wind mitigation course under rule 61G4-18.001(2)(f)?
Paragraph (2)(f) names those six categories; plumbing, mechanical and the other specialties owe the five hours in (a) to (e) instead. Rule 61G4-18.001 Read the section
-
3. In which years do registered contractors renew, according to the DBPR?
Certified contractors renew by 31 August of even years and registered contractors by 31 August of odd years. DBPR renewal insert Read the section
-
4. Under section 455.2178, within how many days of a course must a provider normally report your completion?
The provider reports electronically within 30 calendar days, and within 10 business days when the renewal date is closer than that. Florida Statutes 455.2178 Read the section
-
5. Under section 489.116, what happens to a delinquent license that is not renewed active or inactive before the current licensure cycle expires?
The statute says the license becomes void, and any later licensure is subject to the initial licensure requirements. Florida Statutes 489.116 Read the section
Search the phrase and the first page is course sellers, each listing the topics slightly differently and none of them linking the rule. Every requirement below is quoted from Chapter 489, Chapter 455 or the board’s rule, linked to its section, and was read on 20 October 2026 unless a different date is given. The statutes, the rule’s history and the inactive fees were rechecked on 17 November 2026.
How many hours of continuing education does a Florida contractor need?
Section 489.115(4)(b) is where the number lives. A certificate or registration renews every two years, and to renew it the holder must show at least 14 classroom hours “of at least 50 minutes each” completed in the biennium since the license was issued or last renewed. So a Florida hour is 50 minutes, which is the only place in this process where the state rounds in your favor. The statute lets the board accept nonclassroom courses hour for hour, and the board did: rule 61G4-18.001(1), effective 26 June 2023, asks for “at least 14 classroom or interactive distance learning hours” from a provider the board has approved.
Two softer routes to credit sit in the same rule. Subsection (1) gives up to four hours, hour for hour, for sitting through a board meeting while it hears disciplinary cases, with seven days’ notice to the board, a sign in and out at every break, and the paperwork to the department within five days. It is the only continuing education where the syllabus is other people’s mistakes, and the rule closes the obvious loophole: “Credit hours may not be earned when the licensee attends a disciplinary case session as a party to a disciplinary action.” Subsection (6) gives the same four hour cap to members of a technical advisory committee of the Florida Building Commission.
New licensees get a break. Subsection (9) says “A person is not required to complete any continuing education requirements” for the year the license is first issued, and anyone licensed more than 12 months before the end of the biennial period “is required to complete seven hours of approved continuing education as a condition of the first renewal.” The statute backs that up: nobody licensed for less than a full biennium owes the full 14. Which license you hold is covered on the page on which Florida contractor license covers your work.
Which topics are required, and for which license categories?
This is the part the course sellers compress into five bullets. The rule has eight. Subsection (2) of rule 61G4-18.001 requires at least one hour in each of the following, and paragraphs (f) to (h) only bite for the categories named. The table is compiled from the rule text as mirrored by Cornell’s Legal Information Institute, read 20 October 2026.
| Paragraph | Topic, as the rule words it | Hours | Who it applies to |
|---|---|---|---|
| (2)(a) | “Specialized or advanced module course approved by the Florida Building Commission, or the Board” | 1 | Every certified and registered contractor |
| (2)(b) | Workplace safety | 1 | Every certified and registered contractor |
| (2)(c) | Business practices | 1 | Every certified and registered contractor |
| (2)(d) | Workers’ compensation | 1 | Every certified and registered contractor |
| (2)(e) | Laws and rules regulating the construction industry | 1 | Every certified and registered contractor |
| (2)(f) | Wind mitigation methodologies | 1 | General, Building, Residential, Roofing, Specialty Structure, Glass and Glazing |
| (2)(g) | Pool electrical | 1 | Commercial pool/spa, Residential pool/spa, Swimming pool/spa servicing, Residential pool/spa servicing |
| (2)(h) | Cementitious cladding, stucco, plastering and lath | 1 | General, Building, Residential, Specialty Structure |

Count it per license and the named hours come to seven for a general, building, residential or specialty structure contractor, six for a roofing or glass and glazing contractor, six for the four pool categories, and five for everyone else, which includes plumbing, mechanical, air conditioning, underground utility and the specialties the rule does not name. The rest of the 14 is any course the board has approved. Subsection (3) defines the content: business practices means “estimating, contracts, payroll and sales tax compliance” and Chapters 682, 713 and 553; laws and rules means Part I of Chapter 489, Chapter 455 and Division 61G4.
Paragraph (h) is the new one. The DBPR’s construction industry hot topics page says the board added the one hour cladding, stucco and plastering requirement for general, building, residential and specialty structure contractors, and that enforcement begins for registered contractors whose license expires 31 August 2027 and for certified contractors whose license expires 31 August 2028. That wording was read from the search index of the live page on 20 October 2026, because the page refuses scripted readers; the September 2025 archive capture did not yet carry it. The rule text already lists the hour, so a course that includes it is the safe choice either way.

When is the renewal deadline and what does renewing cost?
The deadline is the same date every time: 31 August. Certified contractors renew in even numbered years and registered contractors in odd numbered years, so the next registered cycle ends 31 August 2027 and the next certified one 31 August 2028. The DBPR’s renewal insert for certified contractors carries the fees. The current wording, read from the search index on 20 October 2026, says: “Submit your renewal request online and pay the renewal fee of $205 or $255 with qualified business. If submitted after August 31, 2026, the fee will be $230 or $280 with qualified business.” The same insert says that licensees not in compliance with all continuing education requirements by their expiration date “may face non-renewal or disciplinary action.”
The April 2025 archive copy of that insert, read in full, opened with “There is a 50% fee reduction this renewal period” and listed $105, or $155 with a qualified business. That reduction has ended. Any page still quoting a fee starting with a 1 is describing the 2024 cycle.
| Renewal | 2024 cycle, 50% reduction (archived insert) | 2026 cycle (current insert) |
|---|---|---|
| Active, individual | $105 | $205 |
| Active, with qualified business | $155 | $255 |
| Active, late | $130, or $180 with business | $230, or $280 with business |
| Inactive | $30 ($55 late) | Not stated in the wording we could read |
| Inactive to active | $205 ($230 late) | Not stated in the wording we could read |
The two gaps in the 2026 column can now be filled. The same certified contractor insert, read again through the search index on 17 November 2026 because the PDF still refuses scripted readers, says: “To renew your license Inactive, submit your renewal request online and pay the renewal fee of $55. If submitted after August 31, 2026, the fee will be $80.” Reactivating a current inactive license costs “$305”, or “$330” after the same date. The $25 step from $55 to $80 is the delinquency fee again, and $305 is the $205 active renewal plus the $100 reactivation fee in rule 61G4-12.009. Those are the 2026 certified cycle’s figures. The next certified renewal falls in 2028, and the department prints a new insert for each cycle, so check the one in your account before paying.
Those are the department’s figures, not the statute’s; section 489.115(4)(a) only says the holder returns the renewal application with the fee. The insurance affidavit in subsection (5) travels with the renewal too, and the requirements page covers what it asks for.
How does the DBPR know you finished the course?
You do not send the DBPR a certificate. The provider does, electronically, and the clock is in section 455.2178: a provider must report a licensee’s completion within “30 calendar days” of the course, and within “10 business days” when the renewal date is closer than that, “whichever occurs sooner.” The provider keeps the completion record for at least four years and can be fined up to $500 per violation for not reporting. Section 455.2177 is the other half: the department runs the monitoring system and “may refuse renewal” until the continuing education is satisfied. Your side of the bargain is in rule 61G4-18.001(4): a licensee with more than one license gives every license number to the provider at registration, or the hours land on one license and not the other.
Two more lines decide what counts. Subsection (8) awards credit for a specific course “only once for each renewal cycle,” so the same safety hour cannot be repeated to fill the 14. And the renewal insert sends you to the DBPR online account to “review your requirements, courses completed, or to find a provider,” which is also where you check that the hours actually arrived before the deadline rather than after it.
Renewal in order: what the rule and the insert ask of you
Built from section 489.115, section 455.2178, rule 61G4-18.001 and the DBPR renewal insert, read 20 October 2026. Tick each step as you do it. It does not rule on your eligibility or promise a renewal; the department does that.
General information from the statute, the rule and the department’s insert, not legal advice. Fees and dates change; confirm them in your DBPR account before paying.
Is anyone exempt from Florida contractor continuing education?
Fewer people than the forums suggest. There is no age exemption, no exemption for long service and no exemption for a contractor who only qualifies a business. What the texts do contain is a short list, and every item on it has a condition attached. The first is the new license. Rule 61G4-18.001(9), quoted in the first section above, waives the hours for the year the license is issued and asks for seven on the first renewal from anyone licensed more than 12 months before the cycle ends. Its history page on flrules, read 17 November 2026, shows the rule last took effect on 26 June 2023 with no change proposed since.
| Situation | What the text says about the hours | Source |
|---|---|---|
| First renewal, licensed within 12 months of the cycle’s end | No continuing education for that renewal | Rule 61G4-18.001(9) |
| First renewal, licensed more than 12 months before the cycle’s end | 7 hours instead of 14 | Rule 61G4-18.001(9) |
| Inactive license, renewing as inactive | No hours asked while inactive; hours are due on reactivation | s. 489.116(3) |
| Reactivating after years inactive | At most one renewal cycle of hours, so 14, not 14 per cycle missed | s. 489.116(6) |
| Active duty member of the US Armed Forces, not contracting in Florida | Kept in good standing during active duty and 2 years after discharge | s. 455.02(1) |
| Same member, contracting in Florida for profit | Every renewal provision applies except the fee, which is waived | s. 455.02(1) |
| Spouse of an active duty member, out of state because of the posting | Exempt from renewal provisions while absent | s. 455.02(2) |
The second is inactive status, and it is a deferral rather than a pass. Section 489.116(3) lets an inactive holder go active again only if they meet “all continuing education requirements prescribed by the board”, and subsection (6) caps the bill: the board “may not require an inactive certificateholder or registrant to complete more than one renewal cycle of continuing education for reactivating”. Nothing in the statute asks for hours while the license sits inactive.
The third is military service, and this is where summaries go wrong in both directions. Section 455.02(1) keeps a member of the Armed Forces on active duty in good standing “without registering, paying dues or fees, or performing any other act” for the whole of active duty and “for a period of 2 years after discharge”. The same subsection then adds the catch: a member who works in the licensed occupation “in the private sector for profit in this state must complete all license renewal provisions except remitting the license renewal fee”. So a service member who keeps contracting in Florida still owes the 14 hours; only the fee is waived. Subsection (2) gives a spouse the same good standing, “but only in cases of his or her absence from the state” because of the member’s duties. None of this happens on its own in the DBPR account, and the board decides each case, so whether a particular license qualifies is a question for the department, not for this page.
What happens if you miss the deadline?
Miss 31 August and section 489.116 takes over. A license not renewed by its expiration date becomes delinquent. A delinquent holder must renew as active or inactive “before the expiration of the current licensure cycle,” meaning the next one, or the license is “void” and any later license goes through the initial requirements again, exams and all. The late fees in the insert are the cheap part of that. Every fee line, the $25 delinquency fee and the hardship reinstatement route are worked through on the Florida contractor license renewal page. Until then the public record shows the lapse for anyone who checks, as what each status in a Florida contractor license lookup means explains.
Inactive status is the escape hatch the course sellers rarely mention. The statute does not require continuing education while a license is inactive. To reactivate, the holder pays the difference in fees plus any late fee and completes the board’s continuing education, and the statute caps that at one renewal cycle’s worth, so a contractor inactive for six years owes 14 hours, not 42. What happens when a case goes further is on the page on what the Construction Industry Licensing Board does.
What do contractors who renewed recently report?
We read five dated accounts from 2026, one Reddit thread and three Trustpilot reviews of a single Florida provider, and dropped two contractortalk posts, one written by a provider and one from 2015. Nobody disputes the 14 hours. What they report going wrong is the platform, and when.
- A certified contractor posting in r/Construction in February 2026 knew the hours were due 31 August and asked which of the companies bombarding them with adverts was reputable. The first reply, the same month, had used one provider for about $150 for the 14 hours, in one and two hour packages, and said it reported to the DBPR as each course was completed.
- A second reply in April 2026 had gone with the school everyone recommends and found it felt like clicking through slides; a specific question about easements got a generic answer by email days later.
- A one star Trustpilot review dated 29 August 2026 says a $99, 14 hour general contractor course never appeared in the buyer’s training account. The company replied that the course had moved platforms, the login email was probably in spam, and the course was since completed.
- A one star review the next day, 30 August 2026, says a course paid for in June did not show online. The company’s reply says it phoned the customer, the course was completed and the license renewed.
- A five star review on 9 October 2026 is a repeat customer who used the same provider for an air conditioning license, the continuing education and the books, and praised the online modules.

The range is two happy, one lukewarm, two angry, and both angry reviews are dated in the last three days before the certified deadline. The February account of hours appearing course by course is what section 455.2178 describes; the August reviews are what it looks like when a platform change gets in the way. These are what people report, not a measure of any provider, and the fix they imply is unglamorous: finish in June and check the DBPR account in July.
Where do the ranking pages and the rule text disagree?
Four claims from the first page of results, each set against the text, read 20 October 2026. The provider pages are not named, because none of them is a source and this site does not link paid courses.
| What a ranking page says | What the rule text or the DBPR says |
|---|---|
| A renewal tracker page lists every Florida contractor license as expiring in even years | The DBPR’s renewal insert: certified licenses expire 31 August of even years, registered licenses 31 August of odd years |
| A provider’s guide says the wind mitigation hour is for building and general contractors | Rule 61G4-18.001(2)(f) names six categories: General, Building, Residential, Roofing, Specialty Structure and Glass and Glazing |
| Two renewal guides give the fee as $205 or $209 “plus $50 per qualified business” | The current insert says $205, or $255 with a qualified business, and $230 or $280 after 31 August 2026; the $105 figure on older pages is the expired 2024 reduction |
| Most pages list five required topics | Subsection (2) has eight paragraphs, (a) to (h); the pool electrical and cladding hours are conditional but they are in the rule |
None of these is a scandal. The tracker page is simply wrong about odd years, and a registered contractor who trusted it would renew a year late. The rest are summaries that stopped being updated, the quiet failure mode of a page that paraphrases a rule instead of quoting it. The rule is two screens long. Read it, then buy the course.
Frequently asked questions
Does an inactive Florida contractor license need continuing education?
No. Section 489.116 requires continuing education to reactivate, capped at one renewal cycle’s worth, and none while the license stays inactive.
Can the same continuing education course be taken twice in one cycle?
No. Rule 61G4-18.001(8) awards credit for a specific course “only once for each renewal cycle.” A different approved course on the same topic is fine.
Does teaching a course count toward the 14 hours?
Yes, hour for hour, for the first presentation of a specific course in each renewal cycle, under rule 61G4-18.001(7). Repeat presentations of the same course earn nothing more.
Does a plumbing or air conditioning contractor need the wind mitigation hour?
Not under the rule. Paragraph (2)(f) names General, Building, Residential, Roofing, Specialty Structure and Glass and Glazing only. The five hours in (2)(a) to (e) still apply.
What is the pool electrical hour and who owes it?
Rule 61G4-18.001(2)(g) requires one hour of pool electrical for the four pool and spa categories: commercial pool/spa, residential pool/spa, swimming pool/spa servicing and residential pool/spa servicing.
Do building inspector courses under Chapter 468 count for a contractor?
They can. Rule 61G4-18.001(5) accepts courses approved under Part XII of Chapter 468 when they meet the board’s course content criteria, which are set out in subsection (3).
Finished the page? The same five questions from the top, to see what stuck.
Rules and fees change without notice. This page was checked against the sources linked above on the date shown. If you find something different, tell us in the comments.

Leave a Reply